-40%

NEW / NOS_Russian_Type = "3 MXM-7y"_Battery_[=T=]

$ 0.92

Availability: 39 in stock
  • Condition: New
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Country/Region of Manufacture: Russian Federation
  • Restocking Fee: No
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days

    Description

    We have 1 piece of NEW / NOS Type = Russian 3 MXM-7y battery.
    Battery
    „3 MXM-7y”
    1.) Description:
    This battery is a water-activated electro-chemical system with copper cloride-magnesium.
    It is a disposable device for supplying special equipment with DC.
    There are two types of them: 3 MXM-7y and 3 MXM-7yT.
    The last one of them is designed for using under tropical (T) conditions.
    Characters denotations:
    ·
    3: maximum voltage (V)
    ·
    MXM: refering to electro-chemical system (coppercloride-magnesium, Russian abrev.)
    ·
    7y: continuous working time in hours @20±5ºC
    ·
    T: tropical version
    Working time:
    ·
    @0ºC: 3.5 hours
    ·
    @50ºC: 4 hours
    2.) Construction:
    Battery built up by elements joined on themselves to form two circuits with nominal voltages 1.4V and 2.8V.
    Cords joined on the adjacent sections, their surface is coated by water-proof paste.
    Current outlets are directly wired by leads provided with special terminations.
    3.)Packaging:
    Each battery is packaged in a polyethylene case.
    Each of packaged bateries are closed in a hermeticly isolated metal case located in a wooden box.
    4.) Preparation for work:
    Batteries originaly is uncharged, so it is needed to prepare them for working, as follows:
    o
    Cut the polyethylene case at its seam and take the battery out of it.
    o
    Through 5 minutes immerse the battery into a container full of 20±5ºC water.
    Pay particular attention to the contacts: don’t be wet!
    o
    After 5 minutes take the battery off the water.
    Shake (holding at its sides and no leads) 2-3 times the water off and
    put the battery into the polyethylene case back with its leads out of it.
    o
    Now put the battery into the equipment and connect its leads.
    o
    No more than 30 minutes after connecting battery to the working load,
    it will be provided the normal function of the equipment.
    o
    If a charged battery has not been connected yet to a load,
    then it had to be used within maximum 10 hours storage time.
    Therefore 4 hours continuous work can be accomplished.
    After 1 minute battery recharging procedure afore- mentioned,
    minimum 3 hour continuous work can be achieved again.
    o
    To achive the battery normal working condition in shorter time,
    especially at lower ambient temperatures,
    is recommended the use of warmer water (25±5) and t
    he battery terminals short-cuting for 3-5 minutes before connecting them to the load.
    5.) Storage and transportation:
    o
    Storage ambient temperatures: -40-+30 ºC, relative hummidity max. 80%.
    o
    Transportation: by anyway in its original metal box @ max height: 10.000 mtrs.
    This image is an illustration !!!
    This image is an illustration !!!
    This image is an illustration !!!
    TERMS :
    Winning bidder pays actual shipping cost.
    (It is rate of safety casing,registering and air-mailing).
    The net weight of the Battery is : 80 grams.
    The gross weight of the packaged goods is : ~ 450 grams.
    Postal shipment cost to every country in Europe : 10.50 USD.
    Postal shipment cost to every country outside Europe : 12.00 USD.
    Paying method :
    -per PayPal,
    -per Bank Transfering.
    If you have any questions,I will answer as quick as possible.
    Thanks for visiting my Auction.